SKU: RE-102-Conventional Fire Alarm Control Panel

2 Zone RE-102 Conventional Fire Alarm Panel

Rs. 15,675Rs. 16,500-5% OFF

RAVEL 2 Cone RE-102 Conventional Type Fire Alarm Control Panel.

The RE-102- is a two zone fire alarm control panel build with microprocessor. This panel can support inputs for 2 wire smoke detectors, manual call points and other normally open contact devices. The outputs are Notification Appliance Circuit i.e. Siren and hooters. Ravel Panel has options to connect-Three Form-C relays 2 for fire alarm, 1 fault and can be connected RS 485 Port to interface with remote annunciator(Optional) RE-102 Conventional Fire Panel Can Supervise supply of all wiring, AC Voltage and Battery Level.

Product Feature:

Rugged CRCA sheet with powder coated finish.
Operates on 220v, 50Hz AC supply.
Standby battery back up with built in charging.
Error free Fire / Fault status in unambiguous colored LED indication.
Switch Mode Power Supply.
16 X 2 LCD Display.
Tactile key pad for easy operation.
Main, Standby status indication.
Low Battery visual warning with audible tone.
Zone wise one man walk test facility.
Relay output for actuators.
Lamp Test facility.
Zone Isolation facility with loop voltage cut off.
Programmable Keypad lock.
Programmable Auto Silence.
Compatible to all types of conventional detectors.

Brand:

Ravel Brand Fire Alarm Nepal.

QUANTITY:

RAVEL 2 Cone RE-102 Conventional Type Fire Alarm Control Panel.

2 Zone Conventional Fire Alarm Control Panel	Specification
AC Power	220 VAC, 50 Hz. +10% - 15%
Charging: Constant Voltage	– 27.6v @ 0.5A(Max)
Charging Capacity:	7 Amp Hour Battery Max.
System Quiescent Current	60mA
Initiating Device Circuits (Zone Circuit)	All zones are Class B wiring
Normal Operating Voltage:	Nominal 24 VDC
Alarm Current:	15 – 35mA threshold
Short Circuit Current:	42mA Maximum
Loop resistance:	50 ohms Maximum
End-Of-Line Resistor:	4.7K, 1/4watt
Standby Current:	6.8mA (2.4mA for Detectors)
Notification Appliance Circuits (Sounder Circuit)	Class – B wiring
Operating Nominal Voltage:	24 VDC
Hooter (NACs) output:	1A
End-Of-Line Resistor:	4.7K, 1/4watt
Relay Contact Rating:	2Amps @ 30 VDC, 2Amps @ 30VAC (Fire – 2 No’s, Fault – 1 No.).
System On	Green
A.C Power On	Green
Standby On	Green
Hooter Fault	Yellow
Silenced	Yellow
Zone Fire	Red
Zone Fault	Yellow
Zone Isolate / Walk test	Yellow